fun box

[KornBoy]

i wanna make a rectangle shaped fun box with coping on the two long sides with a bank ramp on one short side with my rail screwed on to it. problem is i'm broke and i don't have any materials. do you know any ways i can get them

[Freaky Styley]

you can get wood at lot of different places. Best bet would be to go to a home construction site and tell one of the carpenters there your story.
Im sure he/she would hook you up.

another way would be to get ur dad/uncle/grandfather involved: They might get a kick out of it.

also have a better idea of what u want....what r the demensions of this box and ramp.

do you have the tools to build this if you get the wood/screws/angle iron.

the tools u will need are:
drill with bits and countersink (one titanium bit to drill the angle iron)
a circular or jig saw
electric screwdriver (manual screwdriver is just too much work and will take the fun out of building it)
If your going to be joining the wood u will also need a wood chisel.
measuring tape and pencil
angle ruler (there great and very cheap)
and of course wood glue.

its alot of stuff I know. but if you wanna build something that will last and u can be proud of..then thats the way to go.

hope this helps ya bro

[KornBoy]

i have the plans and everything i just need the wood. it's going to be a good twelve feet long. a foot high and five feet wide. so i can't afford it.
_____________
don't piss me off,
i'm running out of
places to put the boddies

[Freaky Styley]

take a look at my box in the gallery and see if thats something u might consider.

[notmartianmatt]

i looked at feaky styleys fun box and got sum plans from somwhere and my fun box is da bomb. i just need 2 add angle iron and it is done. how much does angle iron cost?

[Ramp]