my board keeps leaning at an angle

[Voughtie182]

i rearranged my board yesturday. took it apart than putit back together. now it leans at an angle and im having trouble skating it liek that. my trucks dont look very straight. ive tightened the kingpin loosened it. tightend the screws and loosened them butit still leans at an angle. can someone help me? has this ever happened to anyone else b4?

[Greenday]

What do you mean by "rearange"? Maybe you put the deck back the wrong way? Are the trucks facing outward? If they aren't, then that might be your problem. Did you take the trucks apart?

If your board is the exact same as before, then just ride around doing a lot of turns.

[Voughtie182]

myfriend gave me an old board. i put the deck to mytrucks and wheels. i didn't liek the board so i put my old deck on and it was slanted no my trucks r not backwards.

[Linwozzle]

u probably need to break in the bushings again.

[Blaze]

i had this same problem with my old board, try leaning a bit more on the other side of the board, or also you can loosen the kingpin, and tighten it again while pulling down on one side, and it will lean more to that side so you can try to counter lean the lean... i dont really know how to explain it, its confusing

[AlmostJeff]

Do some tic-tacs around in cricles for awhile, and turn and carve around. My guess is that the bushings need set in. Give it some time.

[McJesus]

u probably need to break in the bushings again.
My thought exactly

[EHondo]

I agree... bushings or the trucks are just too tight.

[Voughtie182]

fixed it. all i had to do was switch the trucks. lol

[Ramp]